技術規格指南

Panel Dimensions

Standard panel sizes available from Ruitecno Panels:

• check_circle1220mm × 2440mm (4' × 8'): — The most common size for furniture manufacturing
• check_circle1220mm × 2800mm: — Extended length for tall wardrobe doors and wall paneling
• check_circleCustom dimensions: — Available upon request for project-specific requirements

Thickness Range

Our decorative panels are available in thicknesses from 3mm to 25mm. Common specifications include:

• check_circle3mm - 5mm: Flexible panels for curved surfaces and wall paneling
• check_circle9mm - 12mm: Interior panels, drawer bottoms, shelf backs
• check_circle15mm: Light cabinet doors, interior furniture panels
• check_circle18mm: Standard cabinet doors, wardrobe panels, furniture construction
• check_circle21mm - 25mm: Heavy-duty work surfaces, tabletops, commercial applications

Substrate Options

Ruitecno Panels offers decorative surfaces on the following substrates:

• check_circleMulti-layer Plywood (Plywood): Excellent strength, screw-holding capacity, and moisture resistance. The preferred choice for furniture construction.
• check_circleParticleboard (PB): Cost-effective option for interior applications where weight and budget are considerations.
• check_circleMedium Density Fiberboard (MDF): Smooth, uniform surface ideal for painted or printed applications. Good edge quality for edge-banding.
• check_circleHigh Density Fiberboard (HDF): Higher density than MDF with superior surface smoothness.
• check_circleOriented Strand Board (OSB): Structural applications where decorative surface is needed.

Surface Treatments

• check_circleMelamine (Low-Pressure Laminate): Hard, scratch-resistant surface applied directly to the substrate. Cost-effective for standard applications.
• check_circleHigh-Pressure Laminate (HPL): Premium surface with superior wear resistance. Used for high-traffic surfaces.
• check_circleSynchronized Texture: Registered embossed texture aligned with printed grain for authentic wood feel.

Environmental Standards

All Ruitecno Panels products meet or exceed:

• check_circleISO9001: Quality Management System certification
• check_circleCE: European conformity marking for construction products
• check_circleHENF: High-Emission Neutral Formaldehyde grade for indoor air quality
• check_circleE0/E1: Formaldehyde emission standards compliance

Tolerance Specifications

- Thickness tolerance: ±0.2mm - Length/width tolerance: ±2mm - Moisture content: 8-14% - Density: Varies by substrate type